Lafarge Prestia solves many technical problems,           
such as...

• surface scratches: plasters with impurities (iron oxides, hard particles) makes gritty materials and scratches.
• lumps too fine: plasters will create lumps during paste preparation.
• inconsistency: inconsistency of plaster setting time will disturb the organization of the applicators on sites and create problems.
• difficult mixing: plaster badly protected from moisture will have set plasters lumps that will bring difficult mixing conditions.
• too fast drying: plaster that dries too fast will affect the working conditions (finishing).
• cracks: plaster that expands or shrinks too much will make cracks on surface, as well as a lack of strength.

Those problems put the professional finishing of the construction sites at risk and increase the building materials cost a lot (bigger products waste, bigger plaster consumption because of shorter setting time, etc…). That' s where Lafarge Prestia wants to help!

Benefits with Lafarge Prestia construction plasters

• Our plasters have no harmful impurities (iron, hard particles) because they are made with the purest gypsum, perfectly cleaned, and we have installed more than 60 magnetic separators on our production lines. We therefore believe that our plasters are the best for gypsum boards accessories.
   
• Our plasters fineness is designed by our Research and Development team to minimize the efforts during the mixing and to avoid lumps formation.
   
• Our formulation expertise and choice of chemical additives (resins, fillers, etc…) optimize the strength and the overall quality of our plasters.
   
• Our plasters have a perfectly consistent trowelling time and setting time, thanks to our specific high tech process and on-line process parameters control, high frequency quality testing and ISO 9002 system.
   
• Our packaging is specially designed to prevent water to get in contact with plaster powder and form hard lumps in bags.

Lafarge Prestia Products range

Plaster for wall and ceiling plastering by mechanical projection


Lafarge Spray Plaster is a formulated mix of beta plaster, perlite, selected mineral fillers, chemical additives and resins. These components ensure quick application with spray machine gun, nice workability and professional finishing. Why shouldn't you try this cost-saving product?…

We will be glad to send to you data sheets upon request. Please contact us now.

Plaster for wall and ceiling plastering by manual application

Lafarge Manual Plaster is a formulated mix of beta plaster,
selected mineral fillers, chemical additives and resins. It is the
right product to obtain a coating with a high strength surface, easy to use, and offers many advantages over the old style cement renderings.

We will be glad to send to you data sheets upon request. Please contact us now.

Our standard payment terms are Telegraphic Transfer before delivery or irrevocable Letter of Credit. We are currently preparing the possibility for customers who find it more efficient to pay through internet with credit card.

We will be glad to give you a price quotation. Please contact us.

Meet our team on our Customer Assistance page

Any other question ? Please contact us.

 Back >>

Some technical tips

• The most important and most simple : Use clean tools and apply on clean backgrounds!
• Make sure that the application area is dry, clean and dust free prior to use Prestia plasters.
• Use clean water, tools and bucket to avoid any dry residue in the paste.

 Back >>

Notes about plaster coatings

Mixing operation (Manual Plaster)

• Pour gradually the powder into the water
• Let the product soak 2 – 3 minutes
• Mix to get a homogenous paste
• Let it rest for around 5 minutes
• Mix again gently until the paste is thick enough to be applied

 Back >>

Our logistic know-how, our flexibility in production and our location very close to Bangkok harbor (Laem Chabang) enable us to offer short delivery time to Asian countries. Examples of shipping time between Laem Chabang and…

Purchasing conditions

• Standard packaging is 35Kg bags, specially designed to preserve the plaster the longest and resist even tough handling.
• We supply the bags on strong pallets.

For export markets, we prefer to ship 21 tons per containers (except in Korea where maximum container load is 17 tons and Tokyo harbor where maximum load is 20 tons).

Kindly click on the hyperlinks to continue your navigation

Purchasing conditions

Technical tips

Notes about plaster coatings

The data presented in this document are in accordance with the present state of our knowledge, but do not absolve the user from carefully checking all supplies immediately on receipt. We reserve the right to alter product constants within the scope of technical progress or new developments.

The recommendations made here should be checked by preliminary trials, because of conditions during processing over which we have no control, especially where other companies' raw materials are also being used.

Prestia is a registered trademark of Lafarge Prestia

 Back >>

For any information or reclamation about this Website kindly contact our webmaster@lafargeprestia.com

.